Description

When you’re connecting your drip irrigation system to a water source, don’t forget the pressure regulator. Without it, the excessive water pressure can blow out emitters and fittings, and damage your system. The pressure regulator lowers the water pressure to a set pressure so your drip system can work effectively keeping your fittings and emitters in place, right where you need them. The ¾ in. FPT X ¾ in. FPT pressure regulator is preset at 30 PSI, and commonly used to connect an existing underground irrigation system with ¾ in. MPT pipe to control the water pressure. Install with the directional arrow pointing in the direction of water flow. The pressure regulator is made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors.

Lowers incoming water pressure from a water source for optimal performance of your drip system; Connect to an existing underground irrigation system with a ¾ in. MPT pipe

Attach to an existing underground irrigation system with ¾ in. MPT pipe or fitting; position arrow on device in direction of water flow

Attach the pressure regulator to an existing underground irrigation system with a ¾ in. MPT connection point

Regulates water pressure from water source; preset at 30 PSI, ideal for most drip irrigation systems; Use the directional arrow on the device to position in the direction of water flow; Maintains 30 PSI

Comes with one ¾ in. FPT X ¾ in. FPT Pressure Regulator; Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling